Use this set to make a 4 ft tall fountain.
Details of each Mold:
Pond Curbing - .125 ABS Plastic, curbing mold is perfect for creating a small pond or raised bed. Each mold contains two cavities -- so you can make two pieces at a time.
Each curb measures 15" long x 7" tall and is 4 3/4" wide at the base tapering to 1 1/2" at the top. When complete the diameter of your pond or raised bed will be 48" in diameter (4 ft.)
Windsor Pedestal Set 2pc - .125 ABS plastic, 32" tall, 13 1/2" square top and bottom piece, The mold for the center section creates half of the pedestal so it has to be poured twice and mortared together (easy with basic mortar mix). The crown/base mold measures 13 1/2" x 13 1/2" and will also need to be poured twice in order to get one crown and one base for your pedestal.
Shell Saucer - .125 ABS plastic, 15" diameter x 8" tall, use the 15" Sphere Mold below to use as an insert to create the hollow section.
15" Sphere Mold - .125 ABS plastic, 15" diameter. Use inside the shell planter to create the hollow, then use again to use as planters or concrete spheres (mortar two halves together).
Column Base - .060 ABS plastic, 12" x 12" square, 6" tall. Mortar the column base on top of the Windsor pedestal, then mortar the shell planter on top of that. The column base also serves well as a planter base for the shell planter, or to display a concrete sphere.
Mosaic Tip: The mosaic tile fountain was created by using thin set mortar to attach each tile, then grouted. The home owner added the tile to this fountain after it was installed.